It has english and Spanish two language versions
For English version,its starting device password : 000000
For Spanish version,its starting device password:684234
Models Coverage
for Ac*ura, for Au*di, for A*lfa, for Ch*evr*olet, for Ci*tro*en, for Da*ew*oo, for
Fi*at, for G*M, for H*on*da, for Hy*un*dai, for Isu*zu, for Infi*niti, for
Ja*guar, for K*ia, for Lan*d Ro*ver, for Lan*cia, for Le*xus, for Lin*coln, for
Ma*zda Japan, for M*azd*a USA, for Me*rc*ury, for Mit*subi*shi, for Nis*sa*n,
for Pe*uge*ot, for Re*na*ult, for Ro*ver, for S*e*at, for S*ko*da, for Su*zu*ki,
for To*yota Japan, for Toy*ota USA , for Vol*ksw*agen and for V*W/Au*di (Pin
code reading) .
Functions
1. Read the vehicle malfunction code
2. Clear the vehicle malfunction code
3. Read the system data stream
4. Read IMMO/ECU ID
5. Fetch the machinery key code
6. Clear vehicle key memory
7. Program new key
8. Read vehicle key login password
9. Distinguish types of ECU
10. ECU-IMMOBILISER programme
11. Read EKA password
12. Programme new EKA password
13. Programme telecontrol implement
Install Steps
For V*W Transponder key matching with 5 digits Login Code
Procedure for adding transponder keys to vehicles with separate Immobilizer box:
(German Car A to year 97, for Go*lf 3, for Pass*at B4, Transp*orter, for Lu*po, for Sha*ran)
1) Switch ignition ON with new key.
2)
Select: Immobilizer -> Login: Enter 5 numbers Login Code (add 0 if
you have 4 digits Login Code). For example, if your Login is 1234, enter
1234 -> Save
3) Go to Adaptation
4) Enter 01 in “Channel Number”
5) Enter
6)
Enter number corresponding to the total number of keys to be matched,
The “Stored Value” is the number of keys currently matched. For example,
Enter 2 -> Save
7) Switch ignition off and remove key
8)
Insert next key to ignition and switch ignition on again. Wait 15 sec.
Repeat this step with each key until all keys have been matched.
9) Select: Immobilizer -> Login. Enter Login Code. Go to Adaptation
10) Enter 00 in “Channel Number”
11) Enter 0 and Save. This will learn ECU with Immobilizer.
Procedure for adding transponder keys to vehicles with Immobilizer in the instrument cluster
(German Cars A from year 1997, for Go*lf 2004, for Pas*sat B5, B6 )
1) Switch ignition ON with new key.
2)
Select: Instrument -> Login: Enter 5 numbers Login Code (add 0 if
you have 4 digits Login Code).For example, if your Login is 1234, enter
01234 -> Save
3) Go to Adaptation
4) Enter 21 in “Channel Number”
5) Enter
6)
Enter number corresponding to the total number of keys to be matched.
The “Stored Value” is the number of keys currently matched. For ex,
Enter 2 -> Save
7) Switch ignition off and remove key
8)
Insert next key to ignition and switch ignition on again. Wait 15 sec.
Repeat this step with each key until all keys have been matched.
9) Select: Immobilizer -> Login. Enter Login Code. Go to Adaptation
10) Enter 00 in “Channel Number”
11) Enter 0 and Save. This will learn ECU with Immobilizer.
Package List
1.T300 main unit
2.Cigarette Lighter power adapter cable
3.for G*M/Dae*woo 12P connector cable
4.for Hon*da-3P connector cable
5.for Nis*san 2000 OBDII connector cable
6.for Ni*s*san 14P connector cable
7.OBDII-16P connector cable c/w power input jack
8.for V*A*G OBDII Female to 2×2 adapter cable
9.for Ch*ry*sler-1 Adapter (138)
10.for Chr*ys*ler-2 Adapter (139)
11.for Ho*n*da 3P Adapte
12.for Mit*sub*ishi Adapter
13.for Ni*ss*an Adapter (133)
14.for Su*zu*ki Adapter
15.for HO*ND*A Adapter
16.AD*C 145 Adapter
17.Peugeot Adapte
18.User Manual CD
